Wismec is a giant that has flooded the market with its new products. Just recently they introduced the new Rx200S and Rx75. And here comes a new product again, this time they really have something to offer. The new product is called Rx2/3.
Reuleaux RX2/3 by Wismec
The design remains exactly the same as the previous Rx200S. If you put Rx2/3 and Rx200S side by side, you won’t immediately understand who is who. The only difference affected the adjustment buttons; they were replaced with a rocker. The remaining differences occurred only in technical terms, or rather, even one difference.
Reuleaux RX2/3 by Wismec
This box mod differs from all others in that it can work with both two and three 18650 batteries. Perhaps this was due to the two back covers, which turn a monster with three batteries into a regular box mod with two. But, to be honest, I don’t see the point in this at all. vape cleaning supplies in new zealand The dimensions of the box mod are as follows: 89×34.5/50/40 mm. There are still a huge variety of color options.
Reuleaux RX2/3 by Wismec
With a 146% probability (but this is not certain), the board remained from the rx200S, which in turn remained from the rx200, except that now a restriction has been added when using two batteries. The board has the following technical characteristics:
The maximum power of the box mod is 150\200W with a minimum atomizer resistance of 0.1 ohm and 0.05 ohm in thermal control mode, at a temperature of 200-600F or 100-315.5C.
The box mod operates in the following modes: VW/TC(Ni/Ti/SS)/TCR.
The firmware is updatable.
Reuleaux RX2/3 by Wismec
As I said above, the main feature of the box mod is the ability to work from both three and two 18650 batteries. This was done for those who were not tired of the dimensions of the Rx200/200s. Now the box mod remains just as beautiful, but now it is also compact.
Reuleaux RX2/3 by Wismec
Replacement is very simple; at the bottom of the case there is a button that disconnects the securely fastened cover of the third battery and another cover takes its place. Both covers are included.
Well, it’s time to sum it up. I don’t understand why Wismec would update to the Rx200S and then release the exact same box mod with the ability to use two batteries. Why couldn’t it just be made for two batteries? Thus, they simply killed the 200S, because now no one needs it. However, to each his own, and the new product is available.