The products of Swedish Vaper Company not often can be found in the showcases of vape shops. And it is not because it produces low-quality products, but because it works on the European market, which successfully sell unique squirts, tanks and drips. But sometimes you can find interesting devices in domestic outlets as well, and one of them is HotRod RDA by Swedish Vaper. This drip has a number of features that make it stand out among hundreds of other RDAs from other manufacturers. The specific design, originally realized blowing system and interesting installation of spirals are far not all features that HotRod RDA by Swedish Vaper has.
General Info
HotRod RDA by Swedish Vaper is a drip atomizer designed for using two spirals, with bottom air blow and possibility of using it on squunks. The important feature of the drip is the presence of small windows which both decorate the device and serve for controlling the state of the wattage and coils. The drip is designed so that there are no questions about the installation of fatbuilds in the racks large holes, and for fixing powerful screws are used. new zealand vape shop wellington Swedish Vaper offers HotRod RDA in three colors blue, black and steel which are universal and suitable for most devices.
Outfitting
Taking into consideration the fact that HotRod RDA by Swedish Vaper is serveable drip-atomizer, it is packed with everything you may need for comfortable usage of the drip:
HotRod RDA drip-atomizer;
Squonk pin;
Replacement glass;
Slotted blue screwdriver;
Two spirals;
Replacement screws;
Replacement fingerings;
Cotton plate;
Instructions for use.
The package is rich enough, allowing you to use the drip immediately after unpacking and installing the spirals.
Appearance and Design
If you just look at HotRod RDA by Swedish Vaper, you get the impression that it is not a drip at all, but a small tank. Such thoughts arise when you see the glass, which is not inherent in any way to drips. The glass is located at the bottom of the dome so that the vaper can observe the evaporation of liquid. In addition to purely aesthetic pleasure, the user can monitor the state of the vape and spirals without opening the dome.
The drip is made in a fairly classic form factor, from which a little bit unconventional drip tip stands out. It is made in the form of a truncated cone with a hexagonal pattern on it (something similar was used by other manufacturers more than once). But at the same time, the drip-tip is made in the familiar to many 810-m formats and without the use of orings, so the vaper can safely use any type of vape from his collection.
The diameter of HotRod is 24 mm, so the drip will look quite logically on mechanical mods and on boards, and it is not necessary to make up something such a diameter has already become a standard.
Base, blowing and usage features
If you remove the dome of the drip, you can find two massive racks for counter installation of spirals. Beginners, of course, will have a little trouble with the installation, but in fact, this option is very common and popular. It is worth saying right away that the holes in the racks are very large, so there will be no problems with fat pornokoilami here you can install everything.
Placing the absorbent cotton will not cause any questions, everything is very simple and clear, especially since the tub is deep enough. The manufacturer has not forgotten about the fans of squonk in the kit has the appropriate pin, allowing you to get a tremendous autonomy. It is nice that the manufacturer has taken care of charging the drip through the top you can drip directly through the drip-tip (in moderation, of course) and not be afraid that the HotRod will start to leak through the air intake holes.
The developers at Swedish Vaper have taken a slightly unconventional approach to blowing it lower, with the holes aimed at the spirals being divided into smaller ones. This allows you to get multiple streams of air, so the flavor transfer will be at the highest level. The airflow adjustment is also interesting; it is made with a separate ring at the base of the drip and rotated independently from the dome.
The bottom air vent and the spherical shape of the dome inside surface make this vape an excellent flavoring device which allows you to play with the types of spirals and their resistance.
Conclusions and impressions
HotRod RDA by Swedish Vaper is an interesting device that will definitely appeal to many, as you can get the original atomizer not only in appearance, but also in performance. The combination of flavor and bulk, easy maintenance and unconventional approach to the blowing system will please many vapers, both beginners and veterans.
Advantages and disadvantages
Disadvantages
The glass can break if dropped;
You need to get used to the counter installation of coils;
The design is quite complicated, consisting of a large number of elements.
Advantages
Rich equipment;
The original design;
The use of the window glass;
Possibility to use fat spirals;
Excellent flavor transfer and bulk;
Independent from the dome blowing ring.