The Hotcig DX75 box is no longer a novelty, it is one of three mods on boards from the American company Evolv, produced today.
The kit includes an adapter ring for 22mm atomizers, a pleasant thought from Hotcig.
Hocig DX75 kit:
Hotcig DX75 box mod
Micro USB cable
Adapter for 18650 battery (installed in the mod)
Adapter ring (Beauty Ring)
User manual
Appearance and specifications
There are three color options for the mod: black, black and gray, and black and red, and only the part of the case in the battery area differs, the front panel is always black. uwell vape The color is actually not red, but rather dark burgundy with a slight metallic sheen, the coating on the entire mod is rough and very pleasant to the touch.
Hotcig DX75 Specifications:
Evolv DNA 75 board
Battery support: 1 x 18650 or 26650
Supports nickel (Ni200), titanium (Ti), stainless steel (SS316)
Configuration via Evolv Escribe software
Power adjustment: 1 — 75W
Temperature adjustment: 200 — 600°F / 100 — 300°C
Resistance support: 0.01 — 2Ohm
case material — zinc alloy
Fire button backlight
Spring-loaded 510 connector
Threaded battery cover
Supports atomizers up to ∅30mm
Dimensions:
Height: 87.5mm*30mm*42mm
Weight of the mod without battery: 116.2g (with adapter — 128.5g)
On the front panel there is a familiar to many small display of the DNA board, a micro USB connector, Fire buttons and Up and Down controls. The main button is made of transparent plastic, illuminated by an LED. A black opaque circle is simply glued to the button on top. With factory settings, the button glows red, when pressed – blue. The backlight and colors can be customized using the proprietary Evolv Escribe utility. The USB connector is used for flashing and charging the battery, the board supports charging with 1A current.
Screen and control
On the front panel there is a proprietary 0.91″ display of the board from Evolv, the backlight is bright white and blue, the indication is easy to read even in bright light and in the sun. All control is carried out using three buttons and their various combinations.
Impressions and conclusions
I tested the mod for only a few days, but it left mostly positive impressions. The assembly is at a very high level, despite the large number of connections, they are all tight and the parts are perfectly adjusted in size. The coating is pleasant, the mod lies in the hand very comfortably, does not slip, the longitudinal grooves on the case are not only a decoration, but also provide additional grip with the palm. Considering the form factor of the 26650 device, it is quite small. I do not know what the reason is, in the efficiency of the American board or in the minimum voltage of the battery, but subjectively the operating time at low power seemed much higher than on other single-battery devices. The lid turned out to be quite convenient, it took only a couple of times to change the can to understand that when unscrewing it just do not need to press hard on it.