The Chinese company ShenZhen IVPS Technology Co Limited, under whose brand SMOK numerous devices for vaping are produced, has always been famous for its unusual solutions in battery mods.
SMOK Treebox Plus 220W packaging
The box mod comes to the buyer in a black box, wrapped in a cardboard shirt with a color print of the device on the front side. On the back side of the drain are listed the delivery set, main characteristics and advertising description of the product. smok nord vape On one of the side walls there are QR codes with links to applications from SMOK for mobile devices (in our case, useless, since the device does not have Bluetooth), on the second – the slogan of the Treebox series of devices – Connect With Nature and a sticker with a verification code, serial number and color of the device.
SMOK Treebox Plus 220W Kit
Treebox Plus Box Mod
USB Cable for Firmware
User Manual
Appearance and Specifications
The manufacturer produces two versions: silver and black, the only difference is in the color of the upper and lower metal platforms and buttons. The metal itself is zinc alloy, copper-coated and chrome-plated, i.e. you should not count on the durability of the appearance, radial scratches appeared around the connector in a couple of days. In height, the box mod is approximately comparable to other dual-battery devices, sometimes even lower, but its width is much larger. But the main thing in SMOK Treebox Plus is not the shape, but the material. Most of the case is made, according to the manufacturer, of “100% Brazilian Rosewood” – Brazilian rosewood, a very strong and beautiful wood.
SMOK Treebox Plus 220W Specifications
Dimensions: height: 85mm * width: 59mm * thickness: 27.3mm
Weight: 157.4g (without batteries), 250g (with two batteries)
Power: 1 — 220W
Voltage: 0.8 — 8V
Supported resistance: 1 — 3Ohm (in variable wattage mode) / 0.06 — 2Ohm (in temperature control mode)
Temperature control: 100 — 315°C / 200 — 600°F
A steel 510 connector with a spring-loaded brass pin is located on top. The pin has a small power reserve, the contact itself is very similar to that used in Joyetech products. The steel thread is flush with the case plane, the atomizers fit without gaps, scratches around the connector appear almost immediately.
Screen and control
When installing batteries, a welcome message SMOK appears, then Treebox and the software version, after which the mod turns off. My box mod has firmware 1.0.2, at the time of publication of the review on the manufacturer’s website there were no available updates. During operation, no problems with the board were observed, all buttons worked clearly and the board did not freeze. To turn on the mod, you need to press the Fire button five times. First, you should go to the menu and flip the screen, otherwise the upper button will perform the functions Down or “-“, and the lower Up or “+”.