Vzone has been releasing quite a lot of devices lately in order to successfully gain a foothold in the market. Today’s novelty at first sight did not catch me at all, but digging a little deeper, I reconsidered my views on this device, meet – Preco Kit Plus.
Preco Kit Plus at first sight is an ordinary pipe-mod of which there are hundreds, if not thousands. But not this time. It is incredibly lightweight and works with 18650 batteries. Thus we get a safe mechanical mod.
Kit:
Preco Plus mod
Preco MTL Tank
510dripping
Usb cable for charging
Instruction manual
Warranty card from the manufacturer.
We can’t say that the package is rich, but on the whole it has everything you need. And it is not a starter kit since it requires you to buy at least one 18650 battery.
new zealand vape shop tauranga
Design
It is hard to say something about the design of the device which has only 3 elements. The first element “mdash; is the tube itself, about which it is simply impossible to say anything. The second element is the Fire button, with which everything is a little more interesting. It has a triangular shape with rounded edges and is equipped with a LED indicator to control the level of charge. You can not ask for more in a device like this.
And the last element is the color. The color palette is quite scarce, because there are only three colors in the arsenal of the device: ganmetal, steel and iridescent (from blue to purple). It is the last option that I would buy, because it looks the most interesting. With atomizer it’s really sad because it’s just a piece of plastic in grey or transparent color. But the colored driptip in the color of the body of the pipe-mod adds a little points to the kitty.
The location of the USB port is quite unpleasant, because condensate or leaked liquid can easily get into it. But there is simply no other way out here, because all electronics are located exactly near the button, and moving the USB port down would greatly affect the size and weight of the device. But in general, such a location is not critical if you are careful.
As I wrote above, the device is powered by 18650 batteries, and the battery cover is located in the only possible place at the bottom. The cover is twisted and has no notches at all, which is quite unpleasant, because the mod is very smooth and if you have sweaty hands, you will suffer.
Specifications
Preco Plus mod
Dimensions: 88.5mm x 24mm (128.5mm x 24mm full kit)
Weight: 71g (with tank, without battery)
Body material: stainless steel + plastic
Power: 1 x 18650
Power output: up to 80W
Voltage Range: 3.0 4.2В
Mode of operation: POWER
Supported Resistance: from 0.1 “Omega;
Protection: from low / high resistance, from overheat, from short circuit, from wrong polarity, from overcharge / overdischarge
Connector type: 510 steel, gold plated, spring loaded pin
Screen: none
Micro-USB port / charging: Is, charging current 0.5A
Specifications mod not the worst and I would even say that it squeezes all the power of 18650 batteries. Like I said, it works like a regular mechanical mod but has all the required levels of protection and doesn’t need to be cleaned. If it was not for the minimum sustained resistance I would not hesitate to take it, but alas, I vaporize at 0.08″ hellip;
Seat diameter of the connector pad is 24mm which proves again that it’s almost an ideal candidate as a safe mechanical mod.
Preco MTL Tank
Case Material: Plastic + Stainless Steel
Atomizer type: Maintenance free
Vaporizers: 0.9 “Omega;
Tank Capacity: 2ml
Diameter: 24mm
Height: 40mm with drip tip
Connector: 510, gold plated pin
Weight: 15g
Refills the tank for disposable atomizers quite standard, through a hole closed by a silicone cap. But the capacity hints at the fact that you will have to open it at least a couple of times a day.
The blowing is not adjustable and is made exclusively for MTL puffing. The pin is gold-plated and protrudes quite nicely.
Conclusions
The only option that would suit me personally would be to take this device without the disposable tank, screw a dripper on it and use it as a mech mod. But my dream comes crashing down on the threshold of minimum supported atomizer resistance.
If I think about it with an open mind, I don’t see any disadvantages in this kit at all, except for the lack of a battery in the kit. It is made as simple and handy as possible, what else do you need? One 18650 battery will be enough for more than a day of using the device with the included vaporizer, and if not, you can always buy another one and a charger and be independent of the outlet. Although the disposable vaporizer is not the best, you can always try a whole bunch of others, throwing this one away. So the kit definitely deserves attention and not just from beginners, as it seriously interested even me.
Pros and Cons
Pros:
Insanely light.
Easy to use
Nice design, despite the simplicity
Uses 18650
One of the best alternative mechanical mods I’ve seen
Good autonomy with the included unserviced
Colorful additional draw pipe
Cons:
Not the best complete neo sludge
Very long charging time by USB
Small tank capacity